Product features:

Sunshade: The light transmission reduction coefficient is as low as 0.12, creating a comfortable and quiet indoor environment. The blinds are hollow and airtight, and the angle adjustment and retraction are realized by external or remote control.

Energy saving: Reduce the energy loss of glass by 2/3. According to relevant data: 50% of the energy consumption of general buildings is lost by doors and windows, and 75% of it is lost through glass. The heat transfer coefficient of single-layer glass is 6.0W/m2.k, the heat transfer coefficient of ordinary insulating glass is 2.8W/m2.k, and the heat transfer coefficient of double-glazed blinds is only 2.0W/m2.k when the blinds are adjusted to the appropriate angle. Reduce the energy consumption of air conditioning and save a lot of electricity consumption.

Sound insulation: Excellent sound insulation performance, noise reduction can reach 32bd, most suitable for office partitions, doors and windows of buildings around roads.

Cleanliness: The blinds are installed in the insulating glass as a whole, neat and clean, no curtains are required, easy to clean and disinfect, and dust-free.

Safety: Reduce fire hazards and improve the overall safety level of the building. Double-layer tempered glass is wind-resistant and impact-resistant, reducing the risk of breaking into rooms through broken windows on lower floors.

Thickness Selection Instructions

Within the allowable range of slot width, the indoor surface can be made of 5mm, 6mm, 8mm, and the outdoor surface can be made of any thickness. 20mm/23mm hollow layer

Adopting patented transmission system, manual control using magnetic pole attraction

Single handle control: single-side synchronous control of dimming and lifting

Curtain blade size: T-12.5mm blinds, imported blinds powder uncoated series

Frame width: 38mm

Tempered glass: optional glass (indoor surface does not exceed 8mm)

Glass size calculation formula = visible light size + (overlap amount 12mm*2)

Total thickness (hollow including glass): 5mm+19A+5mm (allowable deviation +2.0-1.0)